INVERTED FLARE FITTINGS

Advantages

  • Two-piece construction- Nut and Body
  • Used with Copper, Brass,Aluminium or Steel tubing
  • Temperature range -65oF to 250oF
  • Seats and threads are recessed, protecting them
  • Shorter nut allows tubing to be bent closer or fitting
  • Shorter overall length for limited space application
  • Fair vibration resistance
  • Resists Mechanical pull-out
  • Easy to disassemble and can be reassembled many times, with no effect on theseal
  • Primary uses: Liquids, Gases and hydraulic brake system.
  • These fittings are available in lead brass, (NSF certified for NSF 61-G classification)
  • Prefix "L" Prior to the existing part numbers for low real products.

Specifications

Meets functional requirements of SAE J512 and J513.

Tube O.D. 1/8 3/16 1/4 5/16 3/8 7/16 1/2 5/8 3/4
Thread Size-B 5/16-24 3/8-24 7/16-20 1/2-20 5/8-18 11/16-16 3/4-16 7/8-14 1 1/16-14

Working Pressure Ranges

Temperature and type of tubing used are important factors. Following table is a goodguide for proper selection. Temperature 730F with copper tubing:

PSI Tube O.D.(Inches) Tube Wall (Inches)
2800 1/8 0.030
1900 3/16 0.030
1400 1/4 0.030
1200 5/16 0.032
1000 3/8 0.032
750 1/2 0.032
650 5/8 0.035
550 3/4 0.035